Mark Scheiderer

Thank you for your reply….

The memory module that came with it is described as a 4 GB (1 x 4 GB) DDR4-3200 UDIMM Memory. It should be non-ECC. There was SAMSUNG label on it. I did look up the code number and the memory that I bought was the same except was 32 GB per card.

The CPU is an Intel® Core™ i9-10900K Processor ((3.7 GHz, up to 5.3 GHz w/Boost, 20 MB cache, 10 coire 125W) + Intel® UHD Graphics 630.

I have tried a single new memory module in the DIMM1 slot, as well as two in slots 1 and 2 and 1 and 3, and the original memory in slot 1 all getting the same 3.2 error.

An IT friend told me to remove all the memory and leave it unplugged overnight then power it up without memory and let it try to booth for a few minutes. Then insert the original memory and let it try to boot for a few minutes–all yielding the 3.2 lights/beeps error code.

It’s no fun working from home…if I throw the pc out the window…i will have to pay for the window repair and pc repair.