Q&A Forum > Networking >

can’t access dvr in local network

1 reply, 2 voices Last updated by TeamKomando:John 7 months ago
Viewing 1 reply thread
  • Author
    Replies
    • September 30, 2023 at 8:19 am #56758

      Ed Morris
      Participant
      @46Chev

      I have a KT&C OMNI960 DVR that is hard wired to the network and 4 cameras. I’m using a free app called vMEye and am not able to find and access the DVR on the network or in the app. I am now looking for a good tutorial and recommended app for viewing the DVR on a Iphone. Also using Netgear Nighthawk to map the network and DVR is not showing up.

    • October 3, 2023 at 9:14 am #56771

      TeamKomando:John
      Participant
      @264458

      Hello Ed,

      From the short amount of research on your DVR that I have done, I have determined they don’t support an app. They support a web browser GUI which to make accessible from outside your network you would need to open ports on your firewall.

      Your best bet would be to replace the system with an NVR & new cameras (Network Video Recorder) which replaces the BNC connections to the cameras with ethernet. Or you could purchase a new DVR with the ability to work with a smart app compatible with Apple IOS devices. This Lorex unit goes for $199.99 and is compatible with your existing cameras.

  • Author
    Replies
Viewing 1 reply thread

You must be a Komando Community member to reply to this post. Sign up or log in.